GORE SKYFLEX Aerospace Tapes are approved for use in several technical orders (TOs) for the Boeing KC-135 Stratotanker. The information presented here is based on Gore’s best practices and intended to be used as a guide only, and procedures in the current version of the TOs supersede any examples Gore provides. For more information, view the instructional videos at www.gore.com/skyflex.

Approved Technical Orders

GORE SKYFLEX Aerospace Tapes are approved for use in the following TOs for the Boeing KC-135 Stratotanker:

  • TO 1-1-691 Aircraft Weapons System Cleaning and Corrosion Control
  • 1C-135-3-1
  • 1C-135-4 

Inspection of Previously Installed Sealant

Whenever the access panel is removed, the sealant must be inspected, as its sealing ability may be degraded if there is damage. This can be prevented by inspecting GORE SKYFLEX Aerospace Tapes for the following:

  • Large nicks
  • Cuts
  • Gouges
  • Corrosion
  • Delamination/separation from the sealing surface

If problems or irregularities are detected, refer to the appropriate application-specific instructions provided by Gore. Otherwise, wipe the surface of GORE SKYFLEX Aerospace Tapes with a clean cloth or rag to remove dust, dirt and other foreign matter before reusing.

Learn More About GORE SKYFLEX Aerospace Materials for Boeing KC-135 Stratotanker

There are countless reasons why aircraft designers and operators trust Gore’s aerospace materials for their specific applications. For one, these single-component materials reduce aircraft downtime because they don’t require curing upon installation, and they also reduce maintenance time by remaining intact over multiple open/close cycles during production and maintenance. Over these cycles, they also remain flexible, complaint and resistant to corrosion, UV radiation and the ingress of water, fuels, oils and hydraulic fluid.

GORE SKYFLEX Aerospace Materials are available in form-in-place tapes or die-cut gaskets. To discuss the sealant needs for your specific Boeing KC-135 Stratotanker application, contact a Gore representative today.


FOR INDUSTRIAL USE ONLY

Not for use in food, drug, cosmetic or medical device manufacturing, processing, or packaging operations.