Original set of GORE® membrane filter bags were in service for more than three years and were removed during a planned maintenance shutdown. Emission levels measured less than required by standards/regulations during this operational period.
The system now runs with a consistent airflow of 41,000 acfm and compartment pressure drops of 4.5 - 6.5" H2O. The customer is able to run two ladles simultaneously, increasing metal throughput.
Box Composting with GORE® Cover
Brochures, 78.56 KB
Just how efficiently and reliably large quantities can be processed compliant to EU Animal By Product Regulations (ABPR) in a small space is demonstrated when GORE Cover is used in a metal frame construction, such as installed at London Waste's EcoPark, UK.
The Principle of Organic Waste Treatment with GORE® Cover
Brochures, 199.29 KB
Take just as much favourably priced nature as possible and as much intelligent technology as necessary. Or more precisely: GORE Cover.
GORE® Cover for Biosolids Composting
Brochures, 1.52 MB
Biosolids Composting: The integrated approach to a comprehensive wastewater treatment solution
GORE® Cover for Recycling Parks
Brochures, 523.54 KB
Recycling Park: The integrated approach to a comprehensive waste treatment programme
GORE® Protective Vents Eliminate Internal Vacuum to Prevent Water Damage and Corrosion
Case Studies, 1.2 MB
A global manufacturer of wireless routers specializes in ruggedized products that withstand water intrusion caused by extreme environmental conditions. During the initial year of installation, one of the products began having issues with water leaking into the enclosure, causing corrosion and performance issues with the electronic components.
GORE® Protective Vents Protect Surfboards from Damage by Sun, Sand and Water
Case Studies, 1.3 MB
Infinity Surfboards Company, located in Dana Point, California, designs a wide range of surfboards for a variety of surfer interests. The heat from the sun caused the air inside their surfboards to expand and the resulting pressure build-up caused delamination of the epoxy skin to occur.
GORE® Protective Vents Increase Performance of Protective Cases by Eliminating Vacuum
Case Studies, 658.07 KB
Pelican engineers knew that they needed to account for pressure differentials. The 0450 Mobile Tool Chest would be transported around the world and often dropped from an airplane. Rapid altitude changes can cause pressure on the seals to increase from about 2 psi (140 mbar) to almost 16 psi (1,105 mbar) in the short period it takes to reach the ground.
BriarTek, Incorporated, the global manufacturer of ORCA® man-overboard alarm systems, needed to outgas the batteries from the sealed alarm enclosure to prevent internal buildup, while meeting the Ingress Protection 67 (IP67) standard for water immersion.